Sightlok RF-1 Rangefinder Mount – range faster using scope reticle, mounts to picatinny and weaver rails, mil-spec anodized 6061-T6 aluminum

The Sightlok RF-1 is a Picatinny / Weaver rail mount for standard handheld rangefinders. It will convert most rangefinders into a weapon-mounted laser rangefinder (WMLRF).

KEY BENEFITS:
– Rangefinder can be co-witnessed (aligned) with the scope
– Rubber mounts increase rangefinder durability vs. rifle recoil
– Mount is solid and will “hold zero.”

ADVANTAGES VS. DEDICATED WMLRF:
– Lower cost
– Superior ranging performance & functionality
(Premium handheld rangefinders like the Sig Sauer KILO5K offer longer ranging, a better ballistic engine, and integration with the Kestrel wind meters for real-time windage calculations, at a fraction of the price of most dedicated weapon-mounted laser rangefinders).
– Eliminates the need for a scope ring replacement / diving board mount
– More flexible mounting options
– Eliminates the problem of illumination from the rangefinder display shining on the shooters face, which can reveal the shooter’s position during night-time engagements
– Enables more fully integrated electro-optic systems such as the Sig Sauer BDX rangefinder/scope system which automatically calculate the firing solution and display a holdover point in the scope reticle, eliminating the need to dial the scope’s elevation turret.

ADVANTAGES VS. HAND-HELD RANGEFINDING:
– Faster ranging
– More accurate ranging due to better optics and greater stability
– Better view of ranged targets using scope optics
– Scope and rangefinder operate as a single-unit
– Fast view switching between rangefinder & scope
– Faster firing solutions
– Fewer missed shot opportunities
– Increased first round hit potential

RANGEFINDER COMPATIBILITY:
Mount accommodates rangefinders with widths ranging from 1.14″ (28.8mm) to 1.58″ (40.2mm).

MATERIALS:
The Sightlok RF-1 is designed and made in the U.S.A. from aerospace grade aluminum alloy with Military Specification (MIL-A-8625F) Type III, Class II Hard Coat finished in matte black. Non-slip 3M rubber on clamp surfaces hold rangefinder securely and help protect the rangefinder from recoil.

MOUNT REQUIREMENTS:
The Sightlok RF-1 mounts securely to any Picatinny (MIL-STD 1913) or Weaver rail.

AZIMUTH/WINDAGE AND ELEVATION ADJUSTMENT:
The Sightlok RF-1 features 4 quick thumbscrews which shift the alignment of the rangefinder within the mount. These enable the rangefinder point-of-aim to be precisely adjusted to match the point-of-aim of the scope.

PROJECT OBJECTIVES:
The goal of the Sightlok RF-1 is to mount the rangefinder as close to the occular lens of the scope as possible such that the shooter can effortlessly switch between the two. To accomplish this, the Sightlok RF-1 allows the rangefinder positioning to be adjusted relative to the scope in 3 dimensions: Height, length, and horizontal distance from Picatinny/Weaver rail.

MOUNTING CLEARANCE:
The mount requires a minimum of 0.25″ (6.5mm) of clearance between the top of the rail and the bottom of the scope to mount under the scope. It can also be flipped and mounted to the rail under the scope occular if other mount points are obstructed.

SIZING AND ADJUSTMENT RANGE:
Rangefinder height adjustment (choose between 3 rails): 1.24″ (31.6mm)

Length adjustment: (sliding variable length as measured from from the front of the rail clamp to the back of the rangefinder holder) 4.3″ to 6.5″ (10.9-16.5cm)

Horizontal distance from Picatinny/Weaver rail adjustment (3 different-length options are included):
Small: 1.38″ (3.5cm)
Medium: 1.62″ (4.1cm)
Large: 1.94″ (4.9cm)

Having variable options for horizontal distance from the Picatinny/Weaver rail ensures that the rangefinder laser beam can clear windage/brightness/focus knobs/focus rings on the scope.

The Sightlok RF-1 can mount on either the left or right side of the scope.

SPECIFICATIONS:
Weight:
9.4 to 9.7 ounces (268-275 grams), depending on configuration

Assembled dimensions:
Height: 2.2″ (55.8mm)
Width (adjustable): 3.8″ to 4.3″ (95-108mm)
Length (adjustable): 4.3″ to 6.5″ (10.9-16.5cm)

PACKAGE INCLUDES:
Aluminum Rangefinder Clamp
Aluminum Lever Arm
Aluminum Short Rail Clamp
Aluminum Medium Rail Clamp
Aluminum Long Rail Clamp
Aluminum Rail Clamp Lock
Carbon Steel Elevation & Windage Bolts
Carbon Steel Mounting Nuts and Bolts
Detailed User Guide

MADE IN THE USA:
The Sightlok RF-1 is engineered, tested, manufactured, and assembled in the U.S.A.

LIFETIME WARRANTY:
Sightlok has manufactured this mount in the U.S.A. to be rigid, rugged, and dependable. We understand the importance of quality in the field, at the shooting range, or on your next hunt. When it comes to quality, we have your back.

We will repair or replace your Sightlok product in the event it becomes damaged or defective, at no charge to you. If we cannot repair your product, we will replace it with a product in perfect working order of equal or better physical condition.

THE SIGHTLOK® WARRANTY IS:
– Unlimited Lifetime
– Fully Transferable
– No Warranty Card Required
– No Receipt Required
– No Time Limit Applies
– No Charge